Preorder: Jurassic Park – Fallen Kingdom 1/6 Blue + Raptor Hatchling Egg + Triceratops 5 Bust

Preorder: Sideshow – Star Wars: Obi-Wan Kenobi Premium Format™ Figure –

Inchiostro & Tempera e’ lieta di presentare il preorder Italiano delle nuove:

Jurassic World: Fallen Kingdom 1/6 Blue al prezzo di  850.00 Euro 

Jurassic Park: Raptor Hatchling 1/1 Statue al prezzo di  320.00 Euro 

Jurassic Park: Triceratops 1/5 Bust al prezzo di  880.00 Euro 

– *Pagamento a rate disponibile – Payment Plan Available –

In arrivo a Dicembre 2019 Gli oggetti sono preordinabili a partire da oggi seguendo il link che trovate qui sotto che vi porterà sul nostro sito ufficiale.

Il Preordine di oggi è:

Jurassic World: Fallen Kingdom 1/6 Blue
€850,00

Jurassic World: Fallen Kingdom Statue 1/6 Blue
By Prime 1 Studio
ETA: END 12/2019


Prime 1 Studio is proud to present 1/6 Scale LMCJW2-01: Blue from Jurassic World: Fallen Kingdom.

Blue is a female Velociraptor that appears in Jurassic World (2015) and Jurassic World: Fallen Kingdom. She is known to be stubborn but is quite loyal to Owen Grady. She is more intelligent and cunning than the other raptors made for Jurassic World. With Blue still alive, she and many other dinosaurs will now face an impending danger, in the form of an erupting volcano. Which Owen and Claire mount a campaign to rescue the remaining dinosaurs from this extinction-level event. Jurassic World: Fallen Kingdom is a 2018 American Science Fiction Adventure film and the sequel to Jurassic World film.

The artist behind this project was Steve Jubinville, modeling Lead/Asset Supervisor of Industrial Light & Magic for Jurassic World franchises. Fans can expect the product to be the most movie accurate you will ever find. This 1/6 Scale Blue statue measures approximately 16 inches tall and 26 inches width and based from one of the iconic scenes. This is a must have for all Jurassic Worlds franchises fans.

Product Size: 41 x 65 x 46 cm

Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse.

Jurassic Park: Raptor Hatchling 1/1 Statue
€319,90

Jurassic Park: Raptor Hatchling 1/1 Statue
By Chronicle Collectibles
Pre-order: Available 2019 Q2


The beautiful Jurassic Park 1/1 Scale Raptor Hatchling is based off of one of the most iconic scenes in the original Jurassic Park movie when Grant, Ellie and the other visitors witness the hatchlings birth in the lab of John Hammond’s dinosaur theme park.

“The magic of that scene with the hatching baby velociraptor in Jurassic Park remains even after all these years. It’s been great fun to recreate this piece for fans and it’s something that’s never been done before,” says Paul Francis, Creative Director at Chronicle Collectibles.

Check out all the official details posted below…

In celebration of the opening of Jurassic World we’re proud to present the simultaneously adorable and terrifying Jurassic Park 1:1 Hatching Baby Raptor! With this piece, we have perfectly captured the moment when one of the eggs hatches while park owner John Hammond shows the team the raptor egg incubators.

Details:
• Limited Edition
• Officially licensed
• For safety reasons, the Baby Raptor can’t leave the egg 😉
• Companion piece to 1:1 Velociraptor Egg
• Crafted out of mixed media
• Measures 11″ tall on a 6″ diameter base

Jurassic Park: Triceratops 1/5 Bust
€880,00

Jurassic Park: Triceratops 1/5 Bust
By Chronicle Collectibles
Pre-order: Available 2019 Q2


“Welcome to Jurassic Park!”

Thanks to the massive success of our previous 1:5 scale T-Rex busts, we are continuing the line with the world’s first officially licensed 1:5 scale Triceratops Bust from the original Jurassic Park. As you will recall, the Triceratops played a key role in the film by giving Dr. Grant and Ellie their first up close encounter with a fully grown dinosaur. At Chronicle Collectibles, we are thrilled to bring home this magic moment of cinema for Jurassic Park fans with this striking 1:5 scale Triceratops Bust!

This gorgeous dinosaur bust was created from a scaled down 3-D scan of the Sick Triceratops as seen in the first film. Since the existing life-size scan of the Sick Triceratops only featured one side of the face, our skilled artists mirrored the head for the opposite side and then carefully detailed it to ensure it was wholly accurate and not just a mirror image. The result is a stunning portrait that complements our previous busts and can either be featured with them or as a standalone piece.


Tutti gli oggetti  presentati in questa pagina: – Jurassic Park – Fallen Kingdom 1/6 Blue + Raptor Hatchling Egg + Triceratops Bust – sono disponibili per ordini o preordini presso la Fumetteria Inchiostro & Tempera di Napoli.

______________________

Sito Web: http://www.inchiostroetempera.it

Blog: https://inkandtemp.wordpress.com/

Facebook: https://www.facebook.com/inchiostroetempera

Twitter: https://twitter.com/Inkandtemp

______________________________________________

mads_25th

Inchiostro & Tempera – II Trav. Via T. De Amicis # 39 A/B/C

(Metro Collinare Policlinico) – 80131 – Napoli – ITALIA – Tel. 081/1874 0762  –




Annunci

Statue News: P1 Studio – Jurassic World: Fallen Kingdom – Blue 1/6 Scale Statue

Statue News: Sideshow – P1 Studio – Jurassic World: Fallen Kingdom – Blue 1/6 Statue –

Prime 1 Studio presenta la nuova Jurassic World: Fallen Kingdom – Blue 1/6 Statue“. La statua sara’ in preordine da domani al prezzo di USD 699.00 per la versione Standard e di USD 750.00 per quella Exclusive. In attesa di conoscere la conversione in Euro, seguitemi dopo il salto per vedere le foto!

Prime 1 Studio is proud to present 1/6 Scale LMCJW2-01: Blue from Jurassic World: Fallen Kingdom.

Blue is a female Velociraptor that appears in Jurassic World (2015) and Jurassic World: Fallen Kingdom. She is known to be stubborn but is quite loyal to Owen Grady. She is more intelligent and cunning than the other raptors made for Jurassic World. With Blue still alive, she and many other dinosaurs will now face an impending danger, in the form of an erupting volcano. Which Owen and Claire mount a campaign to rescue the remaining dinosaurs from this extinction-level event. Jurassic World: Fallen Kingdom is a 2018 American Science Fiction Adventure film and the sequel to Jurassic World film releasing this Friday, June 22, 2018.

The artist behind this project was Steve Jubinville, modeling Lead/Asset Supervisor of Industrial Light & Magic for Jurassic World franchises. Fans can expect the product to be the most movie accurate you will ever find. This 1/6 Scale Blue statue measures approximately 16 inches tall and 26 inches width and based from one of the iconic scenes. This is a must have for all Jurassic Worlds franchises fans.

Statue features:
– Size approximately 16 inches tall [(H)41.5cm (W)65.2cm (D)45.5cm]
– Size approximately 4 inches tall [(H)11.2cm (W)16.0cm (D)11.8cm] (For Exclusive version only)
– One (1) Antique Gold 1/6 Baby Blue statue (For Exclusive version only)

Edition Size:
– Regular Version: TBD
– Exclusive Version: 500


 Tutti gli oggetti  presentati in questa pagina: – P1 Studio – Jurassic World: Fallen Kingdom – Blue 1/6 Scale Statue – sono disponibili per ordini o preordini presso la Fumetteria Inchiostro & Tempera di Napoli.

1)logoink4

______________________

Sito Web: http://www.inchiostroetempera.it

Blog: https://inkandtemp.wordpress.com/

Facebook: https://www.facebook.com/inchiostroetempera

Twitter: https://twitter.com/Inkandtemp

______________________________________________

mads_25th

Inchiostro & Tempera – II Trav. Via T. De Amicis # 39 A/B/C

(Metro Collinare Policlinico) – 80131 – Napoli – ITALIA – Tel. 081/1874 0762  –


 

Preorder: Jurassic World Baby Blue – PCS Transformers Optimus Prime – Avengers Infinity War Captain America Statues

Preorder: Jurassic World Baby Blue – PCS Transformers Optimus Prime – Avengers Infinity War Captain America Statues –

Inchiostro & Tempera e’ lieta di presentare il preorder Italiano delle nuove:

Jurassic World: Fallen Kingdom – Baby Blue 1/1 Statue al prezzo di 1.180,00 Euro 

Iron Studios Avengers Infinity War Captain America al prezzo di 119.99 Euro 

PCS Transformers Classic Statue Optimus Prime al prezzo di 199.99 Euro 

– *Pagamento a rate disponibile – Payment Plan Available –

In arrivo a Gennaio/Settembre 2019 Gli oggetti sono preordinabili a partire da oggi seguendo il link che trovate qui sotto che vi porterà sul nostro sito ufficiale.

Il Preordine di oggi è:

Jurassic World: Fallen Kingdom - Baby Blue 1/1 Statue
€1 180,00

Jurassic World: Fallen Kingdom – Baby Blue 1/1 Statue
By Chronicle Collectibles
Preorders – Available 2019 Q1


Payment plan Available!

“You know me.”

When the Jurassic World: Fallen Kingdom trailer first premiered, the scene that probably caught your eye the most was the flashback sequence involving Blue and Owen when Blue was barely a hatchling. Blue has arguably been the fan favorite of the new Jurassic World franchise, and a favorite of the team at Chronicle Collectibles as well. So, it gives us great pleasure to present our first collectible from Jurassic World: Fallen Kingdom – 1:1 Baby Blue.

This life-size statue of Baby Blue was made using the same digital files from Industrial Light & Magic as you see in the film, making this the most screen-accurate Baby Blue you will ever find. This 1:1 scale statue will surely make for a show-stopping centerpiece to any Jurassic Park fan’s collection and will be instantly recognizable to your guests, co-workers, friends, and family. In other words, pretty much anyone who ventures out to the megaplex to see this summer’s hottest blockbuster will know exactly what you have and you’ll be the absolute envy of them.

Discover the fun you’re going to have with this statue as you recreate the scene where Owen plays with Baby Blue. We fully anticipate lots of pictures will pop up on social media of fans posing with our 1:1 Baby Blue statue in a variety of settings, limited only by fan creativity.

Don’t miss this chance to bring Baby Blue home to your collection!


Iron Studios Avengers Infinity War Captain America
€119,99

Avengers Infinity War BDS Art Scale Statue 1/10 Captain America
By Iron Studios
ETA: END 01/2019


Straight from the Marvel Blockbuster “Avengers: Infinity War” comes this 1/10th scale statue!

The Polystone statue stands approx. 23 cm tall and comes with matching diorama base.

Features:

– Based on original 3D references from the movie
– Made in Polystone
– Hand painted
– Includes base which can be connected to other characters from the Wakanda diorama
– Includes translucent water on base


PCS Transformers Classic Statue Optimus Prime
€199,99

PCS – Transformers Classic Scale Statue Optimus Prime
ETA: END 09/2019


PCS Collectibles is proud to present the OPTIMUS PRIME “Classic” Scale Statue. The first in a line of all new collectibles depicting the AUTOBOTS and DECEPTICONS as they first appeared in the classic animated series THE TRANSFORMERS, this line will feature meticulously detailed paint applications to recreate the look of the animated series as it’s never been done before.

OPTIMUS PRIME stands approximately 27 cm tall and features swap out parts to offer collectors multiple display options.

Product Size: 27 x 17 x 28 cm


Tutti gli oggetti  presentati in questa pagina: – Jurassic World Baby Blue – PCS Transformers Optimus Prime – Avengers Infinity War Captain America Statues – sono disponibili per ordini o preordini presso la Fumetteria Inchiostro & Tempera di Napoli.

______________________

Sito Web: http://www.inchiostroetempera.it

Blog: https://inkandtemp.wordpress.com/

Facebook: https://www.facebook.com/inchiostroetempera

Twitter: https://twitter.com/Inkandtemp

______________________________________________

mads_25th

Inchiostro & Tempera – II Trav. Via T. De Amicis # 39 A/B/C

(Metro Collinare Policlinico) – 80131 – Napoli – ITALIA – Tel. 081/1874 0762  –



Preorder: LEGO® – Jurassic World Collection

Preorder: LEGO® – Jurassic World Collection –

Inchiostro & Tempera e’ lieta di presentare il preorder Italiano delle nuove:

LEGO® Jurassic World Blue’s Helicopter Pursuit al prezzo di 69.99 Euro 

LEGO Jurassic World Carnotaurus Gyrosphere Escape al prezzo di 79.99 Euro 

LEGO® Jurassic World™ – Indoraptor Rampage al prezzo di 79.99 Euro 

– *Pagamento a rate disponibile – Payment Plan Available –

In arrivo a Maggio 2018. Gli oggetti sono preordinabili a partire da oggi seguendo il link che trovate qui sotto che vi porterà sul nostro sito ufficiale.

Il Preordine di oggi è:

LEGO® Jurassic World Blue's Helicopter Pursuit
€49,99
LEGO® Jurassic World™ – Blue’s Helicopter Pursuit
ETA: END 05/2018


Watch out for the trap! Too late-Blue has been tricked into entering the cage after spotting food left by Wheatley and the pilot. Jump onto the quadbike and speed after Owen’s dinosaur ally before the evil hunters fly off with it in the helicopter. Fire the crossbow to stop them, set the dinosaur free and take back the stolen eggs-but watch out for the helicopter’s powerful 6-stud shooter.

– Includes 3 minifigures: Owen, Wheatley and a pilot, plus a Blue the Velociraptor figure.
– Features an open-door helicopter with rotating blades, belly hook, 6-stud shooter, dual searchlights and space for a storage chest, plus a cage with folding sides and frame with attachment for helicopter cable, and a quad bike with a spare tire.
– Velociraptor features posable limbs and snapping jaws.
– Turn the handle to set the helicopter blades spinning!
– Place the Velociraptor in the trap, fold up the sides and then lift it up using the helicopter’s belly hook and fly off.
– Shoot Owen’s crossbow stud shooter at the helicopter to make it land, then release Blue from the cage and retrieve the stolen dinosaur eggs.
– Weapons include a tranquilizer gun with a syringe, a handgun stud shooter and a crossbow stud shooter.
– Accessory elements include Owen’s backpack, dinosaur tooth, chicken leg and a dinosaur egg.
– This cool toy for kids is suitable for ages 7-12.
– Helicopter measures over 4″ (11cm) high, 10″ (27cm) long and 7″ (20cm) wide.
– Quad bike with trailer measures over 1″ (4cm) high, 3″ (10cm) long and 1″ (4cm) wide.
– Trap/cage measures over 3″ (10cm) high, 4″ (12cm) wide and 4″ (12cm) deep when open, and 2″ (7cm) wide and 2″ (7cm) deep when closed.
– Velociraptor stands over 2″ (7cm) tall.

Pieces: 397

LEGO Jurassic World Carnotaurus Gyrosphere Escape
€79,99
LEGO® Jurassic World™ – Carnotaurus Gyrosphere Escape
ETA: END 05/2018


Run for cover! Things are getting hot on Isla Nublar as the island’s volcanoes start erupting and a deadly Carnotaurus appears. Hit full speed in the truck and help Owen, Franklin and Claire escape the falling lava rocks and rampaging predator. Hide in the mobile control center or launch the Gyrosphere, but don’t forget to rescue the baby dinosaur and its eggs before you go!

– Includes 3 minifigures: Owen, Claire and Franklin, plus 2 dinosaur figures.
– Features a truck with a trailer and mobile control center, plus an overgrown Gyrosphere station.
– Truck features a 2-seater cab with sunroof and stud shooter, attached to a mobile control center with computer and cabinets, plus a detachable trailer with Gyrosphere launch function.
– Overgrown Gyrosphere station features 5 lava rocks, eruption function, dinosaur nest and a Gyrosphere launcher.
– Carnotaurus features posable limbs and snapping jaws.
– Activate the erupting lava function and help the heroes dodge the falling rocks!
– Launch the Gyrosphere from the trailer or overgrown Gyrosphere launcher, and send it racing to escape the chasing Carnotaurus!
– Also includes a tranquilizer gun.
– Accessory elements include a shovel and 3 dinosaur eggs.
– This fun toy is suitable for ages 7-12.
– Truck measures over 4″ (12cm) high, 5″ (15cm) long and 3″ (8cm) wide.
– Trailer measures over 3″ (9cm) high, 5″ (15cm) long and 3″ (10cm) wide.
– Carnotaurus stands over 5″ (14cm) tall.
– Overgrown Gyrosphere station measures over 6″ (16cm) high, 4″ (12cm) wide and 7″ (20cm) deep.
– Gyrosphere measures over 2″ (6cm) across.

Pieces: 577

LEGO® Jurassic World™ - Indoraptor Rampage
€129,99

LEGO® Jurassic World™ – Indoraptor Rampage at Lockwood Estate
ETA: END 05/2018


Caught red-handed! Find a safe hiding place in the estate and keep your calm as the deadly Indoraptor smashes through the windows. Wait for help from Owen, Claire and Blue, and use whatever you can find to battle the rampaging dinosaur.

– Includes 6 minifigures: Owen, Claire, Maisie, Mills, Wheatley and Eversol, plus an Indoraptor and baby Velociraptor figure.
– The 3-level Lockwood Estate features an office, bedroom with bed, laboratory area with museum display cases and a collapsible roof.
– Indoraptor and Velociraptor feature posable limbs, head and snapping jaws.
– Also includes a buildable triceratops skull.
– Customize the estate using the configurable walls.
– Push the dinosaur heads through the windows to cause a smashing effect.
– Place the baby Velociraptor in the laboratory and run some DNA tests.
– Pull the lever to activate the collapsing roof!
– Weapons include a tranquilizer gun and an axe.
– Accessory elements include an auction hammer, umbrella and a dinosaur egg.
– This toy for girls and boys is suitable for ages 8-12.
– Lockwood Estate measures over 8″ (22cm) high, 6″ (16cm) wide and 8″ (22cm) deep.
– Owen’s bike measures over 1″ (3cm) high and 1″ (5cm) long.
– Indoraptor stands over 4″ (12cm) tall.
– Triceratops skull measures over 3″ (8cm) high, 3″ (9cm) wide and 2″ (6cm) deep.

Pieces: 1019


Tutti gli oggetti  presentati in questa pagina: – LEGO® – Jurassic World Collection – sono disponibili per ordini o preordini presso la Fumetteria Inchiostro & Tempera di Napoli.

______________________

Sito Web: http://www.inchiostroetempera.it

Blog: https://inkandtemp.wordpress.com/

Facebook: https://www.facebook.com/inchiostroetempera

Twitter: https://twitter.com/Inkandtemp

______________________________________________

mads_25th

Inchiostro & Tempera – II Trav. Via T. De Amicis # 39 A/B/C

(Metro Collinare Policlinico) – 80131 – Napoli – ITALIA – Tel. 081/1874 0762  –


Statue News: Chronicle Collectibles – Jurassic World – Indominous Rex 1/24 Scale Statue

Statue News: Chronicle Collectibles – Jurassic World – Indominous Rex 1/24 Scale Statue –

Chronicle Collectibles presenta la nuova Jurassic World – Indominous Rex 1/24 Scale Statue. I preordini dovrebbero aprire domani, al prezzo di 750.00 USD. In attesa di conoscere la conversione in euro, seguitemi dopo il salto per tutte le immagini!

Ten successful years have passed since Jurassic World was renamed and reopened to the public. InGen’s owner, Masrani Global Corporation, is overjoyed with the opulence of the park and continues to pressure the InGen scientists to push for bigger and better attractions. After seeing a decline in profits, Simon Masrani pressures the park’s chief scientist, Dr. Henry Wu, to craft a new dinosaur by splicing DNA from multiple dinosaurs and other animals. Unbeknownst to Masrani, Wu already had plans to weaponize his spliced creations for military operations.

When scientists in the real world or a fictitious one create new weapons, the key is packing the most punch with the resources available to them. The Indominus Rex is no different. Some of the known species that were used by Dr. Wu in the creation of the hybrid dinosaur are Tyrannosaurus rex, Velociraptor, Carnotaurus, Giganotosaurus, Majungasaurus, Rugops, and Therizinosaurus as well as modern animals like cuttlefish, tree frogs, and a pit viper snake. The mixed DNA of these creatures birthed a dinosaur so strong and intelligent that she escapes from her pen by controlling her body temperature to fool the thermal cameras, tricking the staff into thinking she had already escaped. Just before all hope was lost for Jurassic World, an unlikely adversary appears to contain the rampant Indominus Rex, giving audiences one of the most epic battles in the Jurassic Franchise.

The Indominus Rex is the first of two installments of this Final Battle. The second segment will be available for pre-order at a later date. The bases will align to create the diorama of the battle scene, or the two products can be displayed separately in the dynamic poses designed by Glen McIntosh from Industrial Light and Magic. Glen was the Animation Supervisor responsible for the Indominus Rex on Jurassic World and has been instrumental in bringing this diorama to life. The Indominus Rex is roughly 30″ long and 12″ tall on her own, so put together the entire diorama will be about five feet long.

 


Tutti gli oggetti  presentati in questa pagina sono: – Chronicle Collectibles – Jurassic World – Indominous Rex 1/24 Scale Statue – disponibili per ordini o preordini presso la Fumetteria Inchiostro & Tempera di Napoli.

1)logoink4

________________________

Sito Web: http://www.inchiostroetempera.it

Blog: https://inkandtemp.wordpress.com/

Facebook: https://www.facebook.com/inchiostroetempera

Twitter: https://twitter.com/Inkandtemp

______________________________________________

mads_25th

Inchiostro & Tempera – II Trav. Via T. De Amicis # 39 A/B/C

(Metro Collinare Policlinico) – 80131 – Napoli – ITALIA – Tel. 081/1874 0762 –


Preorders: Chronicle Collectibles – JURASSIC WORLD OWEN AND BLUE 1/9 SCALE STATUE

Preorders: Chronicle Collectibles – JURASSIC WORLD OWEN AND BLUE 1/9 SCALE STATUE –

Inchiostro & Tempera e’ lieta di presentare il preorder Italiano delle nuove:

Chronicle Collectibles – JURASSIC WORLD OWEN AND BLUE 1/9 SCALE STATUE al prezzo di 519.90 Euro –

– *Pagamento a rate disponibile – Payment Plan Available –

In arrivo a 3rd Quarter 2017. Gli oggetti sono preordinabili a partire da oggi seguendo il link che trovate qui sotto che vi porterà sul nostro sito ufficiale.

Il Preordine di oggi è:

Chronicle Collectibles – JURASSIC WORLD OWEN AND BLUE 1/9 SCALE STATUE


JURASSIC WORLD OWEN AND BLUE 1/9 SCALE STATUE

– Chronicle Collectibles – 

Estimated to ship in 3rd Quarter 2017.


Limited Edition Size: TBD after 30 days

– Payment plan Available –

“You might have made them in a test tube, buy they don’t know that. These animals are thinking, “I gotta eat. I gotta hunt. I gotta…” You can relate to at least one of those things. Right?”

Twenty-two years have passed since Jurassic Park was overrun by InGen’s prehistoric creations. A new park has opened on Isla Nublar and has been successfully operating for 10 years. New exhibits have driven more business to the park which in turn causes the Masrani Global Corporation, InGen’s owner, to press for more unique dinosaurs to be featured in the park. When a new, mysterious hybrid dinosaur manipulates the security system in her pen and finds her way free, chaos ensues and history repeats itself.

When the Indominus Rex begins her rampage, the only line of defense for the park is the game warden, Owen Grady, and the four Velociraptors that he raised from birth. They have learned to work together over the years, but more importantly, they understand that Owen is their Alpha…mostly. Like any large, sharp-toothed pet, there are always risks, but throughout this horrifying experience, Blue and Owen display that any animal to human relationship just needs trust and respect.

The Jurassic World Owen and Blue 1:9 scale Statue was designed to show this relationship between man and beast. The concept design for this piece came from a photo in the Jurassic World periodical from Entertainment Weekly. The pose was decided after working closely with Universal and Industrial Light and Magic. The 3D sculpt work was provided by Dean Tolliver and Sean Dabbs. Owen was painted by Nathan Eakins and Blue by Alex Alva.
Product Details

Licensor
Jurassic Park™ and Jurassic World™ are trademarks and copyrights of Universal Studios and Amblin Entertainment, Inc. Licensed by Universal Studios Licensing LLC. All Rights Reserved.
Dimensions
12″ wide, 8.5″ tall and 8.5″ deep


Disponibilità : Preorder!
ci sono in magazzino: 0

€519,90


Tutti gli oggetti  presentati in questa pagina: – Chronicle Collectibles – JURASSIC WORLD OWEN AND BLUE 1/9 SCALE STATUE sono disponibili per ordini o preordini presso la Fumetteria Inchiostro & Tempera di Napoli.

1)logoink4

______________________

Sito Web: http://www.inchiostroetempera.it

Blog: https://inkandtemp.wordpress.com/

Facebook: https://www.facebook.com/inchiostroetempera

Twitter: https://twitter.com/Inkandtemp

______________________________________________

Inchiostro & Tempera – II Trav. Via T. De Amicis # 39 A/B/C

(Metro Collinare Policlinico) – 80131 – Napoli – ITALIA – Tel. 081/1874 0762  –